...roxulbased on price, strapping, new siding. Is it worth densepacking the walls before doing the WRB? The kraft paper falling apart or separating from the ins...
Hello, We are redoing our basement ourselves (zone 5, Toronto) and on a budget after gutting the entire finished basement due to extensive moisture penetrati...
Do you have an updated recommendation for attaching exterior mineral wool you built a few years ago? The way we attached mineral wool insulation on the LEED Pl...
...Roxul) and Johns Manville. The other think you'll need is a weather barrier / weather resistive barrier (WRB), and a breatheable one would serve you best to a...
8" semi rigid and 5 1/2" between the studs. why not use 8" semi rigid, 3 1/2" between the studs and 2 " more semi rigid on the inside beneath the gyprock? Is t...
I found a video of a house using the thermal or T-stud. Have you seen this product and what are your thoughts on its use in Canada. It allows for a fully insul...
Our building is just shy of 600 square foot, and currently has a metal roof. It has a slight pitch, but we live in east texas, are on a very tight budget, woul...
Posted by Nina FloresFeb. 16, 2020, 4:57 p.m.Roof coverings3 Responses
...Roxul/rockwool insulation, NO poly vapor barrier & ½” gypsum drywall, sealed with drywall sealer and painted with vapor barrier paint. What problems do you se...
I am building a new home in Naples Florida with a metal roof and open cell foam sprayed on underside of roof deck. I am considering a peal and stick membrane...
Hello! I have an already existing small-incline metal roof over a garage. The roof itself is in very good condition, but I would like to transform it into a ...
Posted by Alexandra DobrescuDec. 3, 2021, 9:03 a.m.Walls and Roofs1 Responses
