...polished, then I would think in your case, repairing the divots would be a much easier way to get to a finished floor you are happy with rather than grinding th...
I contacted several concrete polishers and they each told me something different. Some say use epoxy, some say don’t, I've even had some people suggest wax or ...
...polishedconcrete floor and area rugs for comfort, those are easily picked up if there is any heavy weather events in the forecast. I would also propose that yo...
We have a home built in central BC in the 70s This house was built without vapour barrier in the walls . latex primer and 2 coates of oil based paintwas used ....
At what point/temp & to what extent does polyiso board loose its thermal properties? Does it go below R4.5 per inch? Is it usless at -15C ? or equal to XPS ? P...
I really need help building a natural swimming pond Here is a page with all the information you need, including a free DIY guide to building building a natural...
I live in Chatham Ontario. The garage will be two stories with a pitched roof that faces south. The garage will be adjacent to the pool. Being a two part quest...
We are going nomadic. I want to use a power pod . I will also be using solar . A wind turbine on top of an RV or a Tiny House rolling down the highway will def...
Posted by magnuSongJuly 16, 2021, 4:26 a.m.Tiny house1 Responses
Hi guys im from Canada and I recently finish studying and insulating my basement. I used one and a half inch polyiso board insulation glued to the wall with ad...
I have been doing a bit of research lately on solar power, grid-tied and backup systems. As we plan to build a house to Passive House standards, is there any w...
We'd like to install a natural swimming pool in a backyard but don't know where to start - can you help? We are not natural swimming pool installers , but chec...