DESCRIPTION

A self-adhered, triple layer polypropylene microporous film laminate with a proprietary, full coverage, vapour permeable adhesive.

USES

Installed in walls and sloped roofs behind the primary water shedding surface, SRP AirOutshield SA 280 functions as the air barrier system, secondary drainage plane, underlayment and sheathing membrane.

PACKAGING

Product Code: AIR04 Roll size (WxL): 1.45m x 50m (57” x 164’) Gross Area per roll: 72.5m2 (780ft2) Weight: 24kg (53lbs) per roll Colour: Black (top) and Black (bottom) SYSTEM ACCESSORIES Flashing: AirOutshield SA280 Flashing 200 (TAP05) Tape: SRP 60 UV Seam Seal Tape (TAP03) SRP 100 UV Seam Seal Tape (TAP04) COMPLIANCES Provides an Air Barrier System in accordance with ASTM E2357 and CAN/ULC S742.

INSTALLATION

For complete instructions refer to the detailed installation guide available at srpcanada.ca. SRP AirOutshield™ SA 280 is installed under the primary wall cladding or sloped roofing material. Install to form a continuous membrane over the entire area and to allow water to drain away from openings and penetrations. Ensure there are no blockages that may obstruct the water flow. To optimize performance, install a layer of ventilation mat or battens over the SRP AirOutshield™ SA 280 prior to installing the primary roofing or cladding material.

PRECAUTIONS & LIMITATIONS

不建议将AirOutshield SA 280用于坡度小于2:12的屋顶或长期暴露在紫外线下的地方。对于长期紫外线暴露的开放式接头面板，请使用SRP AirOutshield™UV BLACK (AIR03)。