What is the best way to insulate an old home from the outside?
- Save
- Like
- Comment(3)
- Share
C
Is insulating an existing home from the outside a good solution?
Cate Prichard
June 26, 2021Last updated: July 6, 2021
我们买了一所最近重新装修过的房子，里面的一切都合我们的意。然而，我们坚信绝缘是不够的。我们被告知，吹入式隔热只适用于空墙——我们的墙有隔热，但似乎还不够。我们是否应该考虑和承包商一起探索建造与外界隔绝的东西?我们有一面砖墙，其余的都是墙板。浪费所有用于隔热的室内装置似乎很可惜。谢谢你的建议!
Whenever it is possible, exterior insulation during renovations is preferrable. The problem is that it can cost more, sometimes there isn’t space to insulate without encroaching on neighboring property lines, and sometimes the siding is in great shape and it’s a shame to take it apart. But it sounds like you are already on board with insulating from the exterior, so first check here on our page all about exterior insulation methods –
How to insulate exterior walls from the outside
当你说墙壁是隔热的，但你认为它做得不好时，我想知道这是为什么——你做了能源审计，还是因为高昂的账单或寒冷的室内让你得出了这个结论?这样做很好，特别是如果它“真的”需要它，或者如果壁板无论如何都需要更换。
Our preferred method as a fail safe when we don’t know what is going on inside a wall, is to use Mineral wool insulation. The advantage is that it does not impede the movement of moisture the way rigid foam panels will, which can trap moisture inside walls and lead to rot. Water vapor moves through mineral wool easily, and it isn’t harmed by moisture if it gets wet. And it comes in rigid panels just like foam. And what is really important, is that when you re-install siding
Afterwards, that you make sure there is a proper air space and that walls are able to let moisture escape. So check this page as well –
How to install siding so walls can dry
Hopefully that helps, if you have more questions after reading those pages we are happy to help.
Hi Mike. I'm curious to hear if you tried this method and if it worked? I have ugly yellow siding on the second level of my home on three sides AND our house is freezing in the winter, so we are looking to remove the siding and insulate it from the outside. Best. Terry
Hi Terry, which method do you mean? There are a few safe ways to insulate the exterior, which depend on quite a few factors -
Where you live (your climate zone),
How the existing wall is built (is it insulated and is there an interior vapor barrier)
How much space you have to insulate (do you have close neighbors or a driveway limiting how much insulation you can install)
The point being – it’s most common to see people put foam on the exterior, which will conserve heat, but 1 or 2 inches may trap moisture depending on the existing wall assembly, while putting 6 or 7 inches may alleviate that problem. The short story on that is - there is what is referred to as the ‘2/3s rule’ for home insulation. In cold climates you should have at least 2/3rds of your insulation outside of the vapor control layer, which would be the inside of the foam. That keeps the vapor control layer reasonably warm, which prevents moisture from condensing on it. So if you have 3 inches of insulation and put on 6 inches of foam that's exactly 2/3rds and allows your wall to stay dry. If you have 3 inches of insulation and add 1 inch of foam to the exterior that foam will be cold, and moisture can condense. If you give me a few of those details above I may be able help you come up with a plan.